熱軋板坯測寬及偏移檢測系統
產品編號：STV7700
STV7700熱軋板坯測寬及偏移檢測系統為我公司研發的過程智能監控管理系統，可對熱軋輥道上的板坯寬度及偏移量進行自動檢測，保存相關信息保存；當鋼坯的偏移量超出警界值時,系統會自動發出聲光報警，提醒操作人員及時處理，消除生產隱患。這對企業提供信息化水平、促進安全生產以及提高勞動生產率將發揮積極作用。
1. Real-time monitor the movement condition of hot rolling slab.
2. Automatic measure both upper and bottom width of hot rolling slab.
3. Automatic detect offset
4. Automatically save data into system
5. The system can trigger alarm when deflect is found.
1. Advanced Width Measurement
The system is using two cameras to measure the width of slab. Unlike traditional laser width measurement, camera can minimize the disturbing from high heat, and the system not only can measure the top surface’s width but also the bottom. This will avoid the lost from uneven top and boom.
2. Intelligence Software
The system can send out alarm automatically when any deflect or offset being found. Operator can set a allowance value for deflection, deflection angel, and horizontal offset.
When deflect or offset is over the limit, the system will send out both visual and sound alarm to prevent accident.
3. Database
The system can save all video, and slab information into the system. It also can communicate with plant slab database.
|
Cooling Medium |
Cooling Air |
Inlet Pressure |
0.3～0.7 MPa |
|
|
Air Supply Pipe Diameter |
DN40 |
|||
|
Flow |
0.5M³/min |
|||
|
Cooling Water |
Pressure |
0.3～0.4MPa |
||
|
Flow |
1M³/h |
|||
|
Power |
Power Supply |
AC220V 50Hz |
||
|
Power Consumption |
1000W |
|||